Complies with IEEE 802.11 ac/a/b/g/n, standards Dual-Band Speed up to 2.4GHz 150Mbps, 5GHz 433Mbps Weater-Proof RJ45 Connector, Integragted Passive Power over Ethernet (PoE) Passive PoE Support for Flexible Deployment Provides high performance at a Long-Range Links, depending on its antenna Features up to 600mW of power and an enhanced receiver design Robust weatherproof case withstands harsh outdoor conditions Operation Modes : Router , AP , Repeater , WISP Maxmum Security with WAP, and WPA2 Support 3 LEDs Wireless Signal Strength Build in lightning arrester (15kV ESD) How Does it Work? 1.Slide the straps through the slots on the back of the AP/Router and tighten the straps around the hole. 2.Connect one end of an LAN cable to the PoE port of the provided Power injector and the other end of the LAN cable to the LAN port of the AP/Router. 3.Use another LAN cable to connect the LAN port of the power supply. 4.Plug the power adapter into a wall socket. • High1000mW power and dual polarization delivers long-range coverage • Passive PoE(power over Ethernet) supports for flexible deployment and allows the device to be reset remotely. • Weatherproof IP65-rated housing resists harsh climates. • Dual band speed up to 2.4GHz 150Mbps and 5GHz 433Mbps. • Supports AP, Router, Repeater,WISP as operation modes. In the mode of AP, it provides Access Point, Client, Client Repeater modes for wireless solutions. Note: -Select the wireless network with a signal strength greater than 70% to get the most reliable connection. -The outdoor antenna should be installed at a height of 2 meters above the roof or in a high open place for better reception. - -The signal is according to your environment and channel ,different environment will have different distance ,so dear if when you test it ,you find it have not reach 1500m,pls do not give us bad feedback .thank you Brand WAVLINK SKU 100376064_NP-1020658065 Model AC600